Drop-off Zone
Code: ANCMF-AU-ACF-DZ-01
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA Cleaning Standards
Daily Cleaning
Standard Risk
ISO Compliant
Objective
Ensure the drop-off zone of the aged care facility is clean, sanitised, and safe for residents, visitors, and staff, adhering to Australian cleaning standards and infection control guidelines.
Scope of Work
- Remove all rubbish and debris from the drop-off zone.
- Sweep and mop hard surfaces to remove dirt and stains.
- Sanitise high-touch surfaces such as handrails and door handles.
- Clean and polish any glass surfaces, including windows and doors.
- Ensure all signage is clean and legible.
- Check and clean any outdoor furniture present in the area.
- Inspect and clean any drainage grates to prevent blockages.
Method
- Begin by collecting all visible rubbish and disposing of it in the appropriate rubbish bins.
- Use a broom to sweep the entire area, focusing on corners and edges.
- Prepare a mop with a suitable cleaning solution and mop all hard surfaces thoroughly.
- Apply a disinfectant to high-touch surfaces and allow the appropriate contact time before wiping clean.
- Use a glass cleaner and a microfibre cloth to clean and polish glass surfaces.
- Wipe down all signage with a damp cloth to ensure clarity and cleanliness.
- Inspect outdoor furniture and clean with a suitable detergent and water.
- Check drainage grates and remove any debris to ensure proper water flow.
Equipment
- Broom and dustpan
- Mop and bucket with cleaning solution
- Disinfectant spray
- Microfibre cloths
- Glass cleaner
- Rubbish bags
- Colour-coded cleaning cloths
- Cleaning trolley
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | All surfaces are spotless and sanitised, with no visible dirt or debris. High-touch areas are disinfected, and glass surfaces are streak-free. No odours present. |
| Good | Surfaces are clean with minimal dirt or debris. High-touch areas are sanitised, and glass surfaces have minor streaks. No strong odours present. |
| Pass | Surfaces are mostly clean, with some visible dirt or debris. High-touch areas are wiped but not thoroughly sanitised. Glass surfaces have noticeable streaks. Mild odours may be present. |
| Fail | Surfaces are dirty with visible dirt and debris. High-touch areas are not sanitised. Glass surfaces are dirty with streaks. Strong odours are present. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality