Elevator
Code: ANCMF-AU-CO-E-01
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA CIMS-GB
NEN 2075
Commercial
Daily Cleaning
Standard Risk
ISO Compliant
Objective
To ensure the lift in the commercial office is maintained to the highest cleaning standards, promoting a safe and hygienic environment for all users.
Scope of Work
- Dust and wipe all interior surfaces including walls, doors, and control panels.
- Sanitise control panels and handrails using appropriate disinfectants.
- Vacuum and mop the lift floor, ensuring no debris is left behind.
- Clean and polish mirrors and any reflective surfaces to remove fingerprints and smudges.
- Empty and clean any rubbish bins located within the lift.
- Inspect and clean lift tracks and thresholds to prevent dirt accumulation.
- Remove any unpleasant odours using approved air fresheners.
Method
- Prepare the cleaning trolley with all necessary supplies, ensuring colour-coded cloths are used for different surfaces.
- Begin by dusting and wiping down all surfaces from top to bottom to prevent re-soiling.
- Sanitise high-touch areas such as buttons and handrails with a disinfectant spray and cloth.
- Vacuum the floor thoroughly, paying attention to corners and edges.
- Mop the floor with a neutral cleaner, ensuring it is dry before use.
- Polish mirrors and reflective surfaces using a glass cleaner and microfibre cloth.
- Dispose of rubbish and replace bin liners as needed.
- Finish by spraying a light mist of air freshener to maintain a pleasant environment.
Equipment
- Cleaning trolley with colour-coded cloths
- Vacuum cleaner
- Mop and bucket
- Disinfectant spray
- Glass cleaner
- Microfibre cloths
- Air freshener
- Rubbish bin liners
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | All surfaces are spotless with no visible dust or smudges; mirrors are crystal clear; no odours present; floor is immaculate with no debris; high-touch areas are fully sanitised. |
| Good | Minor dust or smudges on surfaces; mirrors mostly clear; faint odours may be present; floor is clean with minimal debris; high-touch areas are mostly sanitised. |
| Pass | Noticeable dust or smudges on surfaces; mirrors have visible marks; mild odours present; floor has some debris; high-touch areas are partially sanitised. |
| Fail | Significant dust or smudges on surfaces; mirrors are dirty; strong odours present; floor is dirty with visible debris; high-touch areas are not sanitised. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality