Australian National Cleaning Management Framework

Compactor Room
Code: ANCMF-AU-GB-CR-12
Government Building
daily
AS/NZS 3733:1995 ISO 14001:2015 EN 13549:2001 ISSA Cleaning Standards AS/NZS 4801:2001 Daily Cleaning Standard Risk ISO Compliant
Objective

Ensure the compactor room in the government building is maintained to the highest standards of cleanliness and hygiene, adhering to Australian cleaning standards and workplace health and safety requirements.

Scope of Work
  • Remove all rubbish and debris from the compactor room.
  • Sanitise all surfaces, including walls, floors, and equipment.
  • Dust and wipe down all accessible surfaces.
  • Mop floors using appropriate cleaning solutions.
  • Ensure all rubbish bins are emptied and sanitised.
  • Check for and remove any unpleasant odours.
  • Inspect and clean any drains or water outlets.
  • Ensure the room is free from pests and report any infestations.
Method
  1. Begin by removing all rubbish and debris, placing it in designated rubbish bins.
  2. Use a colour-coded cleaning system to avoid cross-contamination.
  3. Apply a suitable sanitising solution to all surfaces, allowing appropriate contact time.
  4. Dust and wipe down surfaces using microfibre cloths.
  5. Mop the floor with a disinfectant solution, ensuring even coverage.
  6. Empty and sanitise rubbish bins, replacing liners as needed.
  7. Use air fresheners or odour neutralisers to maintain a pleasant environment.
  8. Inspect drains and water outlets, cleaning as necessary.
Equipment
  • Colour-coded cleaning cloths and mops
  • Sanitising solutions
  • Microfibre cloths
  • Rubbish bins and liners
  • Odour neutralisers
  • Cleaning trolley
  • Personal protective equipment (PPE)
Quality Criteria
Performance LevelCriteria
ExcellentAll surfaces are visibly clean and sanitised, no dust or debris present, no odours detected, bins are empty and sanitised, floors are spotless and dry.
GoodSurfaces are mostly clean with minor dust, no visible debris, faint odours may be present, bins are empty but not fully sanitised, floors are clean with minor streaks.
PassSurfaces have some dust and debris, noticeable odours, bins are not fully emptied or sanitised, floors have visible marks or are damp.
FailSurfaces are dirty with visible dust and debris, strong odours present, bins are full or unsanitised, floors are dirty or wet.
Documentation
  • Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
  • Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
  • Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
  • Photos: Before and after photos as requested to document cleaning completion and quality