Shower Facilities
Code: ANCMF-AU-I-SF-02
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA CIMS-GB
NEN 2075:2011
Industrial
Daily Cleaning
Standard Risk
ISO Compliant
Objective
To ensure industrial shower facilities are cleaned and sanitised to the highest Australian standards, maintaining hygiene and safety for all users.
Scope of Work
- Thorough cleaning and sanitising of all shower cubicles, including walls, floors, and fixtures.
- Removal of soap scum, mould, and mildew from all surfaces.
- Cleaning and polishing of taps and showerheads.
- Emptying and sanitising of rubbish bins.
- Cleaning and sanitising of all benches and seating areas.
- Dusting and wiping of all horizontal surfaces.
- Inspection and cleaning of drains to prevent blockages.
- Ensuring all consumables such as soap and paper towels are replenished.
Method
- Prepare the cleaning trolley with all necessary equipment and chemicals, ensuring colour-coded cleaning systems are used to prevent cross-contamination.
- Remove all rubbish and dispose of it in the designated waste area.
- Apply appropriate cleaning agents to shower walls, floors, and fixtures, allowing dwell time as per product instructions.
- Scrub surfaces with non-abrasive pads to remove soap scum and grime.
- Rinse surfaces thoroughly with clean water.
- Sanitise all surfaces using a disinfectant approved for industrial use.
- Polish taps and showerheads to remove water spots and fingerprints.
- Wipe down benches and seating areas with a sanitising solution.
- Dust and wipe all horizontal surfaces, ensuring no dust or debris remains.
- Inspect and clean drains, removing any debris to ensure proper drainage.
- Replenish consumables such as soap and paper towels.
Equipment
- Cleaning trolley with colour-coded buckets and cloths
- Non-abrasive scrub pads
- Industrial-grade cleaning agents and disinfectants
- Microfibre cloths
- Rubbish bags
- Protective gloves and eyewear
- Dustpan and brush
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | All surfaces are spotless with no visible dirt, grime, or water spots. No odours present. Consumables fully stocked. Drains are clear and functioning. |
| Good | Minor water spots or streaks visible on surfaces. No odours present. Consumables mostly stocked. Drains are clear. |
| Pass | Some visible dirt or grime on less than 10% of surfaces. Mild odours present. Consumables partially stocked. Drains mostly clear. |
| Fail | Visible dirt, grime, or mould on more than 10% of surfaces. Strong odours present. Consumables not stocked. Drains blocked or slow. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality