Conveyor System
Code: ANCMF-AU-TH-CS-03
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA Cleaning Standards
AS/NZS 4801:2001
Daily Cleaning
Standard Risk
ISO Compliant
Objective
Ensure the conveyor system at the transportation hub is maintained to the highest cleanliness standards, ensuring safety, efficiency, and compliance with Australian cleaning and workplace health and safety standards.
Scope of Work
- Dusting all accessible surfaces of the conveyor system.
- Sanitising handrails and touchpoints.
- Vacuuming debris from the conveyor belt and surrounding areas.
- Wiping down external surfaces with appropriate cleaning agents.
- Emptying and sanitising nearby rubbish bins.
- Inspecting for and removing any visible stains or spills.
- Ensuring all cleaning activities comply with relevant safety standards.
Method
- Begin by dusting all accessible surfaces using a microfibre cloth to capture dust and prevent airborne particles.
- Sanitise handrails and touchpoints using a disinfectant solution, ensuring contact time as per manufacturer's instructions.
- Use a vacuum with a HEPA filter to remove debris from the conveyor belt and surrounding areas, focusing on crevices and joints.
- Wipe down external surfaces with a pH-neutral cleaning agent to prevent damage to materials.
- Empty rubbish bins, replace liners, and sanitise the bin surfaces to prevent odours.
- Inspect the conveyor system for any visible stains or spills and treat them with appropriate stain removers.
- Ensure all cleaning activities are conducted with appropriate PPE and signage to maintain safety standards.
Equipment
- Microfibre cloths
- Disinfectant solution
- HEPA filter vacuum
- pH-neutral cleaning agent
- Rubbish bin liners
- Stain removers
- Personal protective equipment (PPE)
- Safety signage
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | No visible dust or debris; all surfaces sanitised and free of stains; no odours present; bins emptied and sanitised; all cleaning conducted with appropriate PPE and signage. |
| Good | Minor dust or debris in non-critical areas; surfaces mostly sanitised; minor stains present; bins emptied but not sanitised; PPE and signage used. |
| Pass | Noticeable dust or debris; some surfaces not sanitised; visible stains; bins not emptied; PPE or signage missing. |
| Fail | Significant dust or debris; surfaces unsanitised; multiple stains; bins overflowing; no PPE or signage used. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality