Incinerator
Code: ANCMF-AU-TH-I-02
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
ISSA Cleaning Standards
AS/NZS 4801:2001
Daily Cleaning
Standard Risk
ISO Compliant
Objective
Ensure the incinerator area within the transportation hub is maintained to the highest cleaning standards, ensuring safety, hygiene, and compliance with Australian regulations.
Scope of Work
- Remove all rubbish and debris from the incinerator area.
- Sanitise all surfaces, including walls, floors, and equipment exteriors.
- Dust and wipe down all accessible surfaces to prevent accumulation.
- Mop floors with appropriate cleaning agents to remove stains and spills.
- Ensure all drains are clear and free from blockages.
- Check and clean any ventilation grilles and air vents.
- Ensure all cleaning activities comply with relevant safety and environmental regulations.
Method
- Begin by donning appropriate personal protective equipment (PPE) including gloves, masks, and eye protection.
- Use a colour-coded cleaning system to prevent cross-contamination.
- Remove all visible rubbish and place it in designated rubbish bins.
- Apply a suitable sanitising solution to all surfaces and allow it to dwell for the recommended time.
- Use a microfibre cloth to wipe down surfaces, ensuring all areas are covered.
- Mop the floor using a trolley with a dual-bucket system to separate clean and dirty water.
- Inspect and clean ventilation grilles and air vents using a vacuum with a HEPA filter.
- Conduct a final inspection to ensure all areas meet the quality criteria.
Equipment
- Personal protective equipment (PPE)
- Colour-coded microfibre cloths
- Sanitising solutions
- Dual-bucket mop trolley
- HEPA filter vacuum
- Rubbish bins
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | No visible rubbish or debris; all surfaces are spotless and sanitised; no odours present; ventilation grilles are dust-free; floors are free from stains and spills. |
| Good | Minor dust on high surfaces; no visible rubbish; surfaces are clean and sanitised; slight odour may be present; floors are mostly clean with minor stains. |
| Pass | Some dust accumulation; minor rubbish present; surfaces are generally clean but may have some smudges; noticeable odour; floors have visible stains. |
| Fail | Visible rubbish and debris; surfaces are dirty or unsanitised; strong odour present; ventilation grilles are clogged with dust; floors are heavily stained. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality