Staff Lockers
Code: ANCMF-AU-TH-SL-01
AS/NZS 3733:1995
ISO 14001:2015
EN 13549:2001
NEN 2075:2011
ISSA CIMS-GB:2015
Daily Cleaning
Standard Risk
ISO Compliant
Objective
Ensure the cleanliness and hygiene of staff lockers in the transportation hub to meet Australian cleaning standards and workplace health and safety requirements.
Scope of Work
- Dust all locker surfaces, including tops and sides.
- Wipe down locker doors and handles with a sanitising solution.
- Vacuum the floor area around lockers to remove debris and dust.
- Mop the floor with a disinfectant solution.
- Empty and clean rubbish bins near locker areas.
- Inspect for and remove any visible mould or mildew.
- Ensure all cleaning activities adhere to colour-coded cleaning systems to prevent cross-contamination.
Method
- Prepare the cleaning trolley with all necessary equipment and supplies, ensuring colour-coded cloths and mops are used.
- Dust all locker surfaces using a microfibre cloth to capture dust particles effectively.
- Apply a sanitising solution to a clean cloth and wipe down all locker doors and handles, focusing on high-touch areas.
- Use a vacuum cleaner to remove dust and debris from the floor area around the lockers.
- Mop the floor with a disinfectant solution, ensuring the mop is regularly rinsed and replaced as needed.
- Empty rubbish bins, replace liners, and clean the bins with a disinfectant spray.
- Inspect for any signs of mould or mildew and clean with an appropriate mould removal solution if necessary.
Equipment
- Cleaning trolley
- Microfibre cloths (colour-coded)
- Sanitising solution
- Vacuum cleaner
- Mop and bucket (colour-coded)
- Disinfectant solution
- Rubbish bin liners
- Mould removal solution
Quality Criteria
| Performance Level | Criteria |
|---|
| Excellent | All surfaces are free from dust and marks; no visible debris on floors; no odours present; bins are empty and clean; no signs of mould or mildew. |
| Good | Minor dust on surfaces; minimal debris on floors; bins are emptied but may have minor marks; no strong odours; no visible mould or mildew. |
| Pass | Noticeable dust on surfaces; some debris on floors; bins are emptied but not cleaned; slight odours present; minor signs of mould or mildew. |
| Fail | Significant dust and marks on surfaces; visible debris on floors; bins are full or dirty; strong odours present; visible mould or mildew. |
Documentation
- Cleaning Checklist: Digital or paper checklist to verify completion of all cleaning tasks
- Incident Reports: Documentation of any cleaning-related incidents, spills, or issues encountered
- Maintenance Records: Record any maintenance needs identified during cleaning (for reporting to maintenance team)
- Photos: Before and after photos as requested to document cleaning completion and quality